From the free quote to the final rinse, house washing for brick in Stratham Station, NH follows a simple process: inspect, protect, clean, rinse and check. For brick, that means low-pressure wash.
How we clean it
Cleaning solution: Soft wash for algae and mildew; a masonry-specific cleaner for efflorescence and mortar haze.
What to know about cleaning brick
Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit. Organic growth comes off with a soft wash; mineral deposits such as efflorescence need a masonry-safe cleaner instead of more pressure.
Avoid: Zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet.
How often: Every 2-3 years for most homes.
When to book house washing for brick
- Green or black film on the shaded sides of the house
- Dirt splash along the bottom of the walls
- Cobwebs and wasp nests under the eaves
- Chalky or dull-looking siding
- You're planning to paint, sell or list a rental
Why it gets dirty
- Mildew and algae in shade and humidity
- Rain splashing soil onto the bottom courses
- Pollen, dust and road grime
- Spiders and insects under the soffits
Safe steps for homeowners
- Rinse small areas with a garden hose and a soft brush on an extension pole
- Use a mild detergent made for siding, not household bleach straight from the bottle
- Clear plants and furniture away from walls before a wash
- Look for loose siding, open seams or damaged caulk before anyone washes the house
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Why more pressure isn’t better
- Water driven under siding laps and into wall cavities
- Broken window seals and water inside the house
- Stripped paint, raised wood grain or etched stucco from high pressure
- Ladder falls while spraying
How we handle house washing for brick
- Walk the house and point out problem areas or damage
- Cover outlets, lights and fixtures, and pre-wet landscaping
- Apply a soft wash solution from the bottom up
- Rinse from the top down at low pressure, including eaves and soffits
- Rinse plants, check windows and walk the house with you
How much does house washing for brick cost?
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for brick
- Pressure Washing for Brick
- Soft Washing for Brick
- Driveway Cleaning for Brick
- Sidewalk & Walkway Cleaning for Brick
- Patio Cleaning for Brick
- Paver Cleaning & Sealing for Brick
- Rust Stain Removal for Brick
- Graffiti Removal for Brick
- Efflorescence Removal for Brick
- Exterior Mold & Mildew Removal for Brick
- Pre-Paint Washing for Brick
- Commercial Pressure Washing for Brick
- HOA & Apartment Pressure Washing for Brick
Local house washing for brick for Stratham Station, NH
In New Hampshire, snow and slush that sit against the house leave a band of grime and mildew along the lower siding, and shaded north walls stay damp long after the thaw. A spring soft wash removes winter grime before it bakes on over the summer.
Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.
We provide house washing for brick across Stratham Station (ZIP codes 03840, 03857 and 03885) and nearby towns including Newmarket (2.9 mi), Greenland (3.4 mi), Exeter (5.6 mi) and Durham (5.8 mi). Call (555) 010-0000 for a free quote in Stratham Station.
House Washing for Brick: frequently asked questions
How much does house washing for brick cost in Stratham Station, NH?
House Washing for Brick typically costs $300-$700 for a typical 1,500-2,500 sq ft home, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for house washing for brick?
For brick: usually 500-1,500 PSI with a wide fan tip, held well back from the mortar. What we avoid: zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet. The cleaning solution does most of the work, followed by a gentle rinse.
Is house washing for brick safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule house washing for brick?
Every 2-3 years for most homes. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.